Dixon Holedall™ Long External Swage Ferrule, 2 in ID x 2-28/64 to 2-40/64 in OD, Hose, 4 in L, Carbon Steel, Domestic, Mfr.# FL32-1

Dixon® FL32-1 Holedall™ Long External Swage Ferrule

*The actual product may differ from the image shown.

Mfr #: FL32-1
Item #: DIXFL32-1
UPC: 697464318422
Brand: Dixon®

Min Order Qty: 1
Qty Interval: 1

Dixon® External Swage Ferrule, Long, Series: Holedall™, 2 in ID x 2-28/64 to 2-40/64 in OD Nominal, Hose, 4 in Length, Carbon Steel, Plated, 3 in Dia, Domestic

$46.88/EA

Features

The coupling system requires no bolts and results in a clean coupling with no protrusions
The holedall coupling provides long lasting efficiency and safety
"Style FL ferrules are extra long and are used with all long style external swage stems: TML, TGL and TPL styles"
The selection of ferrules is very important to achieve proper coupling-to-hose assembly
Dixon holedall stems and ferrules are specifically designed to be used together as a coupling system
"Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon holedall products"
Do not use a wrench or vice on ferrule
The selection of ferrules is very important to achieve the proper coupling-to-hose assembly
"Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure"
"Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations"
"Externally swaged holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon's assembly procedures, using correct die and ferrule for that particular hose end OD"
Dixon's die and ferrule Recommendation guide is to be used to select correct dies and ferrules
Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
Media being transported through the hose should be compatible with the stem material
Compatibility of ferrule material with the environment in which it will be used is recommended
"For applications other than the ones list, please consult Dixon"
Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
Do not use in connection with drinking water
Wash hands after handling

Specifications

DIMENSIONS	3 in Dia
SERIES	Holedall™
END STYLE	Hose
DOMESTIC/IMPORT	Domestic
NOMINAL SIZE	2 in ID x 2-28/64 to 2-40/64 in OD
TYPE	Long
MATERIAL	Carbon Steel
FINISH	Plated

Features

The coupling system requires no bolts and results in a clean coupling with no protrusions
The holedall coupling provides long lasting efficiency and safety
"Style FL ferrules are extra long and are used with all long style external swage stems: TML, TGL and TPL styles"
The selection of ferrules is very important to achieve proper coupling-to-hose assembly
Dixon holedall stems and ferrules are specifically designed to be used together as a coupling system
"Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon holedall products"
Do not use a wrench or vice on ferrule
The selection of ferrules is very important to achieve the proper coupling-to-hose assembly
"Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure"
"Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations"
"Externally swaged holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon's assembly procedures, using correct die and ferrule for that particular hose end OD"
Dixon's die and ferrule Recommendation guide is to be used to select correct dies and ferrules
Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
Media being transported through the hose should be compatible with the stem material
Compatibility of ferrule material with the environment in which it will be used is recommended
"For applications other than the ones list, please consult Dixon"
Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
Do not use in connection with drinking water
Wash hands after handling

Specifications

Documents

Item Number:	DIXFL32-1
Brand:	Dixon®
Manufacture Part#:	FL32-1
UPC:	697464318422
Product Description:	Dixon Holedall™ Long External Swage Ferrule, 2 in ID x 2-28/64 to 2-40/64 in OD, Hose, 4 in L, Carbon Steel, Domestic, Mfr.# FL32-1

Dixon Holedall™ Long External Swage Ferrule, 2 in ID x 2-28/64 to 2-40/64 in OD, Hose, 4 in L, Carbon Steel, Domestic, Mfr.# FL32-1

Dixon Holedall™ Long External Swage Ferrule, 2 in ID x 2-28/64 to 2-40/64 in OD, Hose, 4 in L, Carbon Steel, Domestic, Mfr.# FL32-1

Features

Specifications

Featured Items