- Mfr #: F20-2
- Item #: DIXF20-2
- UPC: 697464317029
- Brand: Dixon®
- Min Order Qty: 1
- Qty Interval: 1
Dixon® External Swage Ferrule, Standard, Series: Holedall™, 1-1/4 in ID x 1-49/64 to 1-56/64 in OD Nominal, Hose, 2-7/8 in Length, Carbon Steel, Plated, 2-1/4 in Dia, Domestic
- The coupling system requires no bolts and results in a clean coupling with no protrusions
- The holedall coupling provides long lasting efficiency and safety
- "Style F ferrules are used with all standard length external swage stems: TM, TMR, TP, TPR, TG and TGR styles"
- The selection of ferrules is very important to achieve proper coupling-to-hose assembly
- Dixon holedall stems and ferrules are specifically designed to be used together as a coupling system
- "Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon holedall products"
- Do not use a wrench or vice on ferrule
- The selection of ferrules is very important to achieve the proper coupling-to-hose assembly
- "Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure"
- "Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations"
- "Externally swaged holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon's assembly procedures, using correct die and ferrule for that particular hose end OD"
- Dixon's die and ferrule Recommendation guide is to be used to select correct dies and ferrules
- Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
- The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
- Media being transported through the hose should be compatible with the stem material
- Compatibility of ferrule material with the environment in which it will be used is recommended
- "For applications other than the ones list, please consult Dixon"
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
|DIMENSIONS||2-1/4 in Dia|
|NOMINAL SIZE||1-1/4 in ID x 1-49/64 to 1-56/64 in OD|